|
|
 |
680.V3 MP4 (Matched Pair)
Stanton
The legendary 680.V3 cartridge is regarded as one of the best cartridges on the planet for mixing, club use, and scratching. The wide-band frequency response will give you high energy record playback and that extra punch you need to quake the dance floor whether playing dance or hip-hop. The 680.V3's suspension is designed to be very stable for those less then perfect club setups. The suspension is so robust that the 680.V3 functions just as good as a scratch needle as it does as a club needle. Available in the following versions: SingleA single cartridge inside a plastic carry case. MP4The MP4 package includes 2 matched cartridges, mounted on tone-arm like devices, inside a small and practical road-worthy clear "flight-case". Perfect for: Hip-hop / Scratch DJs Club DJs
Product and Price Information... |
|
 |
Accu-Cable Midi-15
Accu Cable
Accu-Cable Midi-15 Accu-Cable Midi-15 Description: Midi Cable: Length: 15-19ft Gage: 6 1st End: Quarter Inch Male 2nd End: Quarter Inch Male Primary Usage: Speaker Get your Accu-Cable Midi-15 today!
Product and Price Information... |
|
 |
Akai CDM25
Akai
Akai CDM25 Akai CDM25 Description: Akai CDM25 CDR for the MPC2500 Turn your MPC2500 into a complete studio workstation. With the Akai CDM25 you can take your project from start to finish and have a CD at the end of it all. A great way to produce Demos or move projects from one studio to another. Use it to back up important data like samples and projects. Get your music heard easily and affordably. Get your Akai CDM25 today!
Product and Price Information... |
|
 |
Akai EWM1
Akai
Akai EWM1 Akai EWM1 Description: EWI4000S replacement mouthpeice A mouthpiece for the Award Winning Akai EWI4000S wind instrument. Get your Akai EWM1 today!
Product and Price Information... |
|
| |
 |
Akai EXM128
Akai
Akai EXM128 128MB Expansion RAM for MPC1000 Akai EXM128 Akai EXM128 Description: 128 MB RAM memory expansion for MPC500, MPC1000, MPC2500 The Akai EXM128 RAM Expansion Card adds 128MB of RAM to your MPC2500 Production Center (sold separately) Increasing the number and/or size of the samples you can run simultaneously. Supercharge your MPC1000. The Akai EXM128 adds 128MB RAM to your MPC1000, adding to the number and/or size of the samples you can run simultaneously. Make the most out of your MPC, increase the size of your musical canvas with Akai's EXM128. Get your Akai EXM128 today!
Product and Price Information... |
|
| |
 |
Akai IB-M208P
Akai
Akai IB-M208P Akai IB-M208P Description: The IB-M208P 8-output board allows you to expand your MPC 2000XL (already installed on Studio and Studio Plus versions) so that you are able to assign different sounds to each output individually Useful for mixing and tweaking sounds separately. Also adds S/PDIF I/O. 8 Out Expander with SPDIF - MPC2000 XL The Akai IBM208P output expansion board for the MPC2000XL, enables you to mix and output internal sampler sounds from eight individual outputs and import signals digitally. The IBM208P is user-installable that is secured with screws, and connects with an included P340 cable. Get your Akai IB-M208P today!
Product and Price Information... |
|
 |
Akai MP12-1
Akai
Akai MP12-1 Akai MP12-1 Description: AC Adaptor for MPC500 (Included)and XR20 (included) Get your Akai MP12-1 today!
Product and Price Information... |
|
 |
Akai MP6-1
Akai
Akai MP6-1 Akai MP6-1 Description: AC Adaptor (optional) for MPD24, MPD32, and MPK49 Akai MP6-1 AC Adapter for MPD24 and MPK49 (optional). Get your Akai MP6-1 today!
Product and Price Information... |
|
 |
Akai MP9-3
Akai
Akai MP9-3 Akai MP9-3 Description: AC Adaptor for MPD16 (Optional) - Can use MP9-II Use this adapter to power up your Akai MPD16 when a USB port is not available. The MP9-3 from Akai is a 9VDC (95mA) optional power supply for the MPD16 pad controller. Get your Akai MP9-3 today!
Product and Price Information... |
|
 |
Akai MP9-II
Akai
Akai MP9-II Akai MP9-II Description: AC Adaptor for EWI4000S (Optional) & E2 (Included) - Can use MP9-3 The MP9-II from Akai is an optional AC adaptor for use with the EWI4000S wind controller. The MP9-3 from Akai is a 9VDC (95mA) optional power supply for the MPD16 pad controller. Get your Akai MP9-II today!
Product and Price Information... |
|
 |
Akai MPC1000
Akai
Akai MPC1000 Akai MPC1000BK Description: 64 track 32 voice sampling sequencer. Built in FX and 6 assignable outs PRODUCTION POWER, ON THE MOVE. Inheriting all the essential features which make the MPC series so iconic, the MPC1000 is not only a perfect complement to its larger MPC siblings, but a powerful Music Production Center in its own right. The MPC1000 combines a 64?Track MIDI Sequencer and a 32?voice Stereo Digital Sampler, with 16 velocity and pressure sensitive rubber pads. 16MB of on?board memory comes standard and can be expanded up to 128 MB of RAM. You can save your work to a Standard Compact Flash Card (up to 2GB). A preloaded CF card is included, to get you going. When connected to a Mac or PC via its built?in USB port, you can simply drag & drop data between the computer and the MPC1000's CF card. Incredibly portable, the MPC1000 is small and ruggedly designed, to easily fit in a backpack or laptop bag for the traveling producer. The perfect machine to quickly create punchy beats. Anyone who wanted an MPC but could not afford it! Typically: Hip-Hop and R and B artist or "Producer", as well as DJ/Live Club performer. Akai MPC1000BK Features: Pattern?based and linear 64?track sequencer with 32 MIDI channels 32?voice drum/phrase sampler with up to 128MB RAM Velocity and pressure sensitive pads for expressive programming 16 levels function: one sound on all pads with varied level, tuning, attack, decay or filter per pad Two Q?Link sliders for real?time performance control Built?in Compact Flash drive and USB port (Mass Storage Class) Standard WAV files samples and MIDI Files sequences Built?in Analog and Digital I/Os, headphone output and 2 x MIDI In /Out Internal sounds in flash 4?way sample layering and velocity switching per pad 4?pole filters (two 2?pole filters) filtering for each of the 32 voices 2 onboard effects processors plus 1 main out effect processor; all which can be used simultaneously Can resample its own output Optional available accessory: 128MB Ram Expansion (EXM128) Akai MPC1000BK Specifications: Sound Generator Data format: 16-bit linear WAV Sampling rate: 44.1 kHz Memory: 16MB standard (11.5MB sound memory), expandable to 128MB with EXM128 option Preset sound memory: 5MB Flash Recording time: 136 sec (16MB mono) 24m28sec (128MB mono) Polyphony: 32-voice Filters: 2 x 2-pole filters per voice Filter types: Low pass, band pass, high pass Number of active programs: 24 (with 64 pads per program) Effects 2 general effects: Chorus, Flanger, 4-band EQ, Bit-Grunger, Compressor, Phaser, Tremolo, Auto Pan, Reverb Master effect: 4 band EQ, Compressor Sequencer Capacity: 100,000 notes Resolution: 96ppq 99 Sequences 64 Tracks per sequence 32 MIDI output channels (16 channels x 2 output ports) Song mode: 20 songs, 250 steps per song MIDI Clock Sync: Master/Slave Drumpads 16 velocity and pressure sensitive pads 4 pad banks 16 Levels: Velocity, Tuning, Filter Cutoff, Attack, Decay
Product and Price Information... |
|
 |
Akai MPC2500
Akai
Akai MPC2500 Akai MPC2500 Description: 64 track 32 voice sampling sequencer. Built in FX and 10 assignable outs THE PLATINUM STANDARD IN SAMPLERS GETS EVEN BETTER. The new MPC2500 Music Production Center is the recognized industry standard, a 32-voice drum/phrase sampler with up to 128 MB of RAM and extensive editing control. Designed for professional music production environments and DJs and live club performers, the MPC2500 features a time-tested user interface, responsive velocity- and pressure-sensitive pads, twin onboard effects processors, four Q-Link controllers (two sliders/two knobs) for extensive real-time control, plus 10 outputs and a S/PDIF digital output. The ultra-powerful MPC2500 sports a 100,000 note/64 track MIDI sequencer that can be assigned to four separate MIDI outputs for a total of 64 independently addressable MIDI channels. Internal sounds reside in flash memory and can easily be swapped for new sounds via compact flash cards, optional user installable hard drive, or the optional CD-ROM drive. A CF card with preloaded sounds is included to get you started. Akai Professional, in its pursuit to remain the leader of digital sampling technology has released the MPC2500. This unit designed for professional audio production, offers drum programming, sequencing, and sampling capabilities. Artists now have the luxury of producing music with a compact music composition center. Applications: Sampling and creating beats MIDI sequencing Live Performance Akai MPC2500 Features: 32-voice drum/phrase sampler with 16MB memory built in, expandable up to 128MB RAM 2 onboard effects processors and a main out effects processor 2 assignable Q-link sliders and knobs for real-time performance control 240 x 64 hinged backlit LCD USB port for computer connectivity Built-in Analog and Digital I/Os, headphone output and 2 MIDI In/4 MIDI Out Chop-shop- slices a loop into individual samples with automatic pad assignment Patched phrase - synchronizes phrase samples to any tempo without changing pitch Continuous sample track - records long audio tracks into a sequence Can resample its own output Audio input thru with Q-link control for real-time control 10 built-in analog outputs, plus stereo Digital I/O Optional available accessories include 128MB Ram Expansion (EXM128), CD ROM Installation Kit (including CD ROM Drive - CD-M25) Akai MPC2500 Specifications: Sound Generator Data format: 16-bit linear WAV Sampling rate: 44.1 kHz Memory: 16MB standard (11.5MB sound memory), expandable to 128MB with EXM128 option Preset sound memory: 5MB Flash Recording time: 136 sec (16MB mono) 24m28sec (128MB mono) Polyphony: 32-voice Dynamic filtering 2 x 2-pole filter per voice Filter types: Low pass, band pass, high pass Number of active programs: 24 (with 64 pads per program) Effects Effects 2 stereo effects and Master effect Effect type Chorus, Flanger, Bit grunger, 4 band EQ, Compressor, Phase shifter, Tremolo, Flying Pan, Reverb, De
Product and Price Information... |
|
 |
Akai MPC500
Akai
Akai MPC500 Akai MPC500 Description: TAKE THE MPC PLATINUM STANDARD EVERYWHERE YOU GO. 48 track 32 voice sampling sequencer. Built in FX. Battery or AC The MPC500 is the first truly portable all-in-one Music Production Center, affording artists the ability to sample and create music on-the-go. Whether you travel around the globe for hit-making sessions or across town to link up for a casual beatmaking hang, the MPC500 is the ultimate answer to your mobile production needs. Fully compatible with the legendary MPC line, you can work anywhere with the MPC500's battery-powered capability and drop them back into your MPC2500 when you get back to the studio. The MPC500 combines a 48-Track MIDI Sequencer and a 32-voice Stereo Digital Sampler, with 12 velocity and pressure sensitive rubber pads. 16MB of on-board memory comes standard and can be expanded up to 128 MB of RAM. When connected to a Mac or PC via its built-in USB port, you can simply drag & drop data between the computer and the MPC500's CF card. Compatible with other MPC products, the MPC500 extends users' studios to fit in with their mobile lifestyles. Applications: Sampling and Beat Creation MIDI sequencing Live Performance Travelling Akai MPC500 Features: Battery powered (6 AA's) or AC powered (with included power adaptor) Pattern-based 48-track sequencer with 16 MIDI channels 32-voice drum/phrase sampler with up to 128MB RAM Velocity and pressure sensitive pads for responsive, accurate programming 12 Levels function: one sound on all pads with varied level or tuning per pad Built-in Compact Flash drive and USB port (Mass Storage Class) Support for standard WAV files and MIDI sequences Built-in Analog I/O, headphone output, and MIDI In/Out Internal sounds in Flash 4-way sample layering and velocity switching per pad 1 low pass filter with resonance per voice On-board effects: 2 stereo effects and a Master effect Akai MPC500 Specifications: Sound Generator Data format: 16-bit linear WAV Sampling rate: 44.1 kHz Memory: 16MB standard (11.5MB sound memory), expandable to 128MB with EXM128 option Preset sound memory: 5MB Flash Recording time: 136 sec (16MB mono) 24m28sec (128MB mono) Polyphony: 32-voice Dynamic filtering: 2-pole lowpass filter per voice Number of active programs: 24 (with 48 pads per program) Effects Effects: 2 stereo effects and Master effect Effect type: Chorus, Flanger, Bit grunger, 4 band EQ, Compressor, Phase shifter, Tremolo, Flying pan, Reverb, Delay Master effect: 4 band EQ, Compressor Sequencer Maximum events: 100,000 notes Resolution: 96ppq 99 Sequences 48 Tracks per sequence 16 MIDI output channels (16 channels x 1 output ports) Song mode: 20 songs, 250 steps per song MIDI Clock Sync: Master/Slave Drumpads 12 velocity and pressure sensitive pads 4 pad banks Connections Record input (L and R): 1/4-inch stereo phone x 2, pseudo balanced -40dBu, input impedance 9k ohm; Max. Input level: +10dBu Stereo output (L and R): 1/4
Product and Price Information... |
|
 |
Akai MPC5000
Akai
Akai MPC5000 Akai MPC5000 Description: Flagship Music Production Center, sampler, sequencer, 8 track recorder, synth LEGENDARY MPC FEEL AND WORKFLOW WITH A GREATLY EXPANDED FEATURE SET. The MPC series set the standard for beat production. What would it take to make the ultimate MPC? Dozens of engineers, 20 years of experience and a new synth and drum sampling engine unlike any MPC ever. Introducing the MPC5000; the new standard for music production. The MPC5000 is the first MPC ever to include 8-track streaming hard disk recording, a 20-voice, 3-oscillator analog synthesizer with arpeggiator, a new sequencing engine with 960 ppq resolution, pad and track muting and mixing, 64 continuous sample tracks. There's even a new FX engine with 4 FX buses and 2FX per bus. In addition, the MPC5000 features a 64-voice drum/phrase sampler with 64MB memory - expandable up to 192MB. The display is twice the size of the MPC2500 and MPC1000 so waveforms appear crystal-clear. Integrated Chop Shop 2.0 now supports stereo chops and Patched Phrases. The MPC5000 is also the first MPC to include Random and Cycle sample playback in addition to velocity Zone Play. A turntable preamp is also included. The MPC5000's virtual analog synth eliminates need for external analog synth modules or buggy software based synthesizers. The new 8-track direct to disk recorder lets you produce your whole song in the MPC and then mix it down with the internal sequenced programs and any input thru material. Add the optional CD/DVD drive and you can then burn an audio or data CD or your mix. Over 650MB of premium-quality sounds from Loopmasters are included to get you up and running with pro-quality production in seconds. Akai MPC5000 Features: 64-voice drum/phrase sampler with 64MB memory built-in. Expandable up to 192MB RAM Three-oscillator virtual analog synth engine with built-in arpeggiator Over 300 Virtual Analog synth presets included Eight tracks of Direct-to-Hard Disk recording Over 40 all new effects available within a modular 4-bus effects processor Master compressor and equalizer Built-in hard disk drive Optional CD-R/DVD drive USB 2.0 port for computer connectivity CF Type-2 card slot (up to 2GB) Chop-Shop 2.0 - slices a stereo loop into individual samples with automatic pad assignment Patched Phrases - creates multiple splits in looped samples to ensure proper tempo sync without changing pitch Continuous Sample Track - ensures samples play in perfect sync no matter where you start the beat in a loop 12 Q-link controllers for internal automation, external MIDI control and quick parameter editing 240 x 128 hinged backlit LCD 10 built-in analog outputs, plus 8 ADAT-optical outputs and stereo S/PDIF IO Powerful new multimode filter Two MIDI inputs and Four MIDI outputs Turntable phono inputs with RIAA pre-amp XLR / 1/4" combo jacks with selectable mic/line levels Sample library provided by Loopmasters.com Akai MPC5000 Specifications: Dimensions [W
Product and Price Information... |
|
 |
Akai MPD16
Akai
Akai MPD16 Akai MPD16 Description: The Akai Professional MPD16 USB/MIDI Pad unit is a dedicated pad controller that can be used with any sampler/sound module and/or sequencer to record and play drum and percussion patterns with the expression and feel that only pads can offer. Equipped with 16 totally assignable MPC pads switchable across two banks (thereby giving you effectively 32 pads) plus a performance slider for hi-hat and other sample switching, the MPD16 is the definitive laptop rhythm controller. The MPD16 has MIDI out so that it can be used with any sampler or sound module. However, the MPD16 is also equipped with USB. Not only can it derive its power supply from that interface when used with Akai Professional's USB equipped Z4 or Z8, it can also communicate with a computer for controlling software applications. Each pad can be set to output MIDI notes of your choosing with a variable velocity range and these can all be set conveniently via your Mac or PC. The MPD16 also inherits some of the MPC series' features such as the FULL LEVEL and 16 LEVELS functions available on dedicated switches Sixteen touch-sensitive MPC pads let you play grooves exactly as you feel them. The days of programming drums and percussions via a keyboard are over. The MPD16 is the perfect controller for computer based drum programming. Also a great trigger pad to control rack-mount samplers for live use. Akai MPD16 Features: 16 original MPC pads (velocity and pressure sensitive) 2 switchable banks MPC's 16-Levels and Full Level features Slider sending continuous controller data MIDI and/or USB operation Powered via USB cable (or optional AC adaptor) Free set-up utility software for Windows, Mac OS 9 and OS X Akai MPD16 Specifications: Pads 16 x 2 banks. Velocity sensitive MPC-style pads Keys Full Level: All pads to maximum output velocity (127) 16 Levels: Each pad offers progressive level for the last selected/used pad Bank: Selects the pad bank Active: Enables the slider Controls Assignable slide Connections MIDI out USB 9V DC (95mA) - not required when used with USB equipped Z4/8 Supplied accessories USB Driver and editor software on CD-ROM Get your Akai MPD16 today!
Product and Price Information... |
|
 |
Akai MPD24
Akai
Akai MPD24 Akai MPD24 Description: PAD CONTROL REDEFINED. 16 pad USB/MIDI controller with 6 faders and 8 assignable 360 knobs Akai Professional's MPD24 is the velocity sensitive pad controller for musicians and DJs. Modeled after the landmark MPC series, the MPD24 allows for an extremely expressive and intuitive solution to percussion and rhythm programming. With 16 MPC-style velocity and pressure sensitive pads, four selectable pad banks for a total of 64 playable pads six assignable faders and eight assignable, 360o knobs for transmitting MIDI Control Change data, the MPD24 provides unprecedented creative freedom for manipulating sampled material. The MPD24 also features transport controls for interfacing with DAW/sequencing applications. A fully reprogrammable controller, the MPD24 is a malleable and multi-functional tool that fits perfectly within any production or performance environment. Applications: Beat Creation MIDI sequencing Live Performance Akai MPD24 Features: 16 MPC-style velocity and pressure sensitive pads 4 selectable pad banks for a total of 64 pads 6 assignable Faders for transmitting MIDI Control Change data 8 assignable 360 degree knobs REW, FF, STOP PLAY and REC buttons that transmit MMC (MIDI Machine Control) messages to DAW/Sequencing applications Backlit, easy to read LCD display MIDI and/or USB operation USB powered (or powered via optional AC adaptor) Included Editor Librarian software (Mac and PC) MPC 16 Levels and Full Level feature Includes a customized version of Fxpansion's BFD Lite Get your Akai MPD24 today!
Product and Price Information... |
|
 |
Akai MPD32
Akai
Akai MPD32 Akai MPD32 Description: MIDI/USB SOFTWARE CONTROL SURFACE USB/Midi Software Control Surface with 16-MPC style pads, BPM note repeat AKAI'S FLAGSHIP PAD CONTROLLER WITH GENUINE MPC PADS. The MPD32 is Akai Professional's ultimate velocity-sensitive pad controller for musicians and DJs. Modeled after the industry-standard MPC series, the MPD32 delivers the most expressive software beat control available. Sixteen velocity and pressure-sensitive genuine MPC pads provide the industry's finest feel and expression. Four selectable pad banks for a total of 64 playable pads, eight assignable faders, eight assignable switches and eight assignable, 360 knobs for transmitting MIDI Control Change data, all combine for unprecedented creative freedom. Three selectable control banks extend the number of available faders, buttons and knobs to 24 each. Two assignable footswitch inputs and an expression pedal input takes the total assignable controller count to 75 - the most by far in any pad controller. The MPD32 also features transport controls for interfacing with DAW/sequencing applications. The MPD32 is a fully programmable controller and multi-functional control surface that fits perfectly within any production or performance environment. Akai MPD32 Features: MIDI synced note-repeat with MPC swing 16 full-sized, genuine MPC pads with velocity and pressure-sensitive response Assignable switches, sliders and endless knobs for a total of 72 controllers 2 assignable Foot Switches 1 assignable Foot Pedal controller Large, easy-to-read custom LCD display 30 user-definable Presets for various DAW and software applications MMC/MIDI Start/Stop transport buttons Get your Akai MPD32 today!
Product and Price Information... |
|
 |
Akai MPK49
Akai
Akai MPK49 Akai MPK49 Description: PERFORMANCE CONTROLLER WITH 12 MPC DRUM PADS CAPTURE EVERY NUANCE OF YOUR PERFORMANCE. Maximize musical ideas on-stage or in the studio with the new Akai MPK49 performance controller. The Akai MPK49 ushers in a new era for USB/MIDI controllers by combining a high-quality, 49-key, semi-weighted keyboard with aftertouch and 12 genuine MPC drum pads. 48 total pads are accessible via 4 pad banks. The pads feature the heart and soul of hip hop: the MPC Note Repeat function and Swing parameters. The Akai MPK49 Performance Controller also has its own arpeggiator, for creating quick, creative riffs in seconds. The Akai MPK49 features MPC 'Full Level' and '12 Levels' functions on its pads, and MPC Swing can be applied to both Note Repeat and Arpeggio functions. Tap Tempo and time-division buttons allow for real-time control of Note Repeat and Arpeggio clock speeds. The Akai MPK49 delivers an amazing 76 assignable controls, with assignable inputs that include an expression pedal, footswitch, pitch bend and modulation wheel. More than just a USB/MIDI controller, the MPK49 captures the soul of your performance. Akai MPK49 Features: 49-key, semi-weighted keyboard with aftertouch and full-sized keys 8 full-sized, 360 degree rotation pots, each with 3 banks for 24 pots total 12 genuine MPC pads with velocity and pressure sensitivity 8 full-sized sliders with 3 controller banks for each for 24 sliders total MPC note repeat and all-new arpeggiator 8 assignable backlit switches with 3 controller banks each for 24 switches total MMC/MIDI Start Stop transport buttons Large, easy-to-read custom LCD display Akai MPK49 Specifications: Number of Keys: 49 + 12 x 4 banks of drum pads Type of action: Semi-weighted Aftertouch (Channel) Computer Interface: USB/MIDI Displays: Custom LCD Footswitchable Patch Changes: yes Number of Independent MIDI Ins/Outs: 1 Programmable Continuous Footpedals: 1 Programmable Footswitches: 1 Programmable controllers: MMC, MIDI START/STOP, MIDI CC System Real-Time Controls: MMC, MIDI START/STOP, MIDI CC Get your Akai MPK49 today!
Product and Price Information... |
|
|
